DeLonghi HHP1500

April 13, 2010
By

Tower Heater: DeLonghi HHP1500
The DeLonghi HHP1500 Safeheat Mica Panel Radiator features thermostatic temperature control, 2 heat settings (max power: 1500W), is wall mountable, and a room thermostat to set and automatically keep the desired room temperature. A convenient carry handle allows for easy portability…. More >>

DeLonghi HHP1500 Safeheat Mica-Panel Heater

Tags: , , , , , , , , ,

7 Responses to “ DeLonghi HHP1500 ”

  1. [...] This post was mentioned on Twitter by Ms Smith. Ms Smith said: DeLonghi HHP1500 http://discounttowerheater.com/124/tower-heater/ [...]

  2. Amy on April 23, 2010 at 9:25 am

    One of the most aesthetically pleasing space heaters I’ve ever seen. it can be sat on rollers or mounted to wall. It can keep my uninsulated 4,000 cubic foot (20′ wide x 20′ long x 10′ high) garage at a tolerable temperature when it’s 15 degrees outside.

    Tip #1: As with any new space heater, it will emit an unpleasant chemical smell when first used. When it’s new, I suggest you set it on high and place it in the garage or outside for 3 to 4 hours before using it inside.

    Tip #2: Hot cords/plugs are usually the result of using the wrong gauge of wire in your extension cord or electrical outlets. Use at least a 14-gauge (I’d probably go with a 12-gauge) extension cord and plug it into an outlet that is wired (with 14, preferable 12, gauge wire) to at least a 15-amp circuit breaker. This will be the only thing you’ll want running on that circuit breaker. If you don’t do that, then don’t complain about hot plugs or wires. It’s not the heater’s fault. It’s a basic principle of electricity.

    Tip #3: No, it’s not going to produce as many BTUs as a propane or kerosene heater will. Electrical heaters are quite capable of producing equal BTUs, without producing carbon monoxide like gas heaters do, but they also have to make it safe to plug into a wall outlet and that means about 1500 watts max. If you have a large room you’ve been heating with a gas heater and you want to replace it with an electric heater, then you’re going to have to get a 240v 30 Amp (or better) heater and probably have an electrician wire it in for you on a dedicated dual-pole circuit. This is a space heater, not a furnace. It’s for making warm rooms warmer. Don’t disparage this heater because you got the wrong tool for the job. Do your research.

    Tip #4: If you want to remove the stickers from the face of the unit and the adhesive is being stubborn, then try heat. If that doesn’t work, then go to an auto parts store. They sell several different adhesive removers that are safe for painted surfaces.
    Rating: 5 / 5

  3. G. Tseng on April 13, 2010 at 11:47 pm

    This DeLonghi HHP1500 is a great heater. I bought it during the Friday Sale on Amazon. I love how it runs without any sound. It works well in a bedroom when you need to your quiet at night. The heat distributes gradually – in a small bedroom, give it a 10-30 min headstart and it will warm up the room nicely. Its slick, flat design looks stylish, modern and will impress your guests.

    I’ve owned it for a few months and been happy with it. However, this “Mica Panel” radiator does raise your electricity cost just like any other heater. Mine’s gone up considerably, from avg. $24 to $57 per month, so it’s not as energy saving as I had hoped. Note the switch / dials on the side do not really mean much – I have the power on “1″ which is supposed to draw 750W (the other setting “2″ draws 1500W), and a heat level at “4″ (moderate level) for most nights – Still my bill goes up a lot.

    If you don’t mind the extra cost, which happens anyway in the winter months, this DeLonghi “Mica Panel” radiator will be a good addition to your place.
    Rating: 4 / 5

  4. Rae B. Faltysek on April 13, 2010 at 9:43 pm

    I use this heater in an unheated screen porch where my dogs sleep. Storm windows keep the wind out, but It was still too cold for the dogs. This heater is great if you’re concerned about “dog proofing”. It was mounted to the wall and I covered the cord with wooden trim along the baseboard, preventing cord chewing. It heats the 12′ by 15′ room to a nice 70 degrees, even though the walls are not insulated. Oklahoma has fairly mild winters, rarely getting below 20 degrees, or so. I can’t say how the heater would work in this application if you have harsh winters, but for keeping an unheated, small room warm in a mild climate, its great.
    Rating: 5 / 5

  5. Chad on April 13, 2010 at 8:41 pm

    One of the most aesthetically pleasing space heaters I’ve ever seen. it can be sat on rollers or mounted to wall. It can keep my uninsulated 4,000 cubic foot (20′ wide x 20′ long x 10′ high) garage at a tolerable temperature when it’s 15 degrees outside.

    Tip #1: As with any new space heater, it will emit an unpleasant chemical smell when first used. When it’s new, I suggest you set it on high and place it in the garage or outside for 3 to 4 hours before using it inside.

    Tip #2: Hot cords/plugs are usually the result of using the wrong gauge of wire in your extension cord or electrical outlets. Use at least a 14-gauge (I’d probably go with a 12-gauge) extension cord and plug it into an outlet that is wired (with 14, preferable 12, gauge wire) to at least a 15-amp circuit breaker. This will be the only thing you’ll want running on that circuit breaker. If you don’t do that, then don’t complain about hot plugs or wires. It’s not the heater’s fault. It’s a basic principle of electricity.

    Tip #3: No, it’s not going to produce as many BTUs as a propane or kerosene heater will. Electrical heaters are quite capable of producing equal BTUs, without producing carbon monoxide like gas heaters do, but they also have to make it safe to plug into a wall outlet and that means about 1500 watts max. If you have a large room you’ve been heating with a gas heater and you want to replace it with an electric heater, then you’re going to have to get a 240v 30 Amp (or better) heater and probably have an electrician wire it in for you on a dedicated dual-pole circuit. This is a space heater, not a furnace. It’s for making warm rooms warmer. Don’t disparage this heater because you got the wrong tool for the job. Do your research.

    Tip #4: If you want to remove the stickers from the face of the unit and the adhesive is being stubborn, then try heat. If that doesn’t work, then go to an auto parts store. They sell several different adhesive removers that are safe for painted surfaces.
    Rating: 5 / 5

  6. Michael Morgan on April 13, 2010 at 6:49 pm

    We’ve been using this panel heater in our 16′ x 20′ bedroom for 6 weeks to save big $$ by turning the central heating way down at night. It works very well to heat the room throughout the night and is virtually silent. There are some tiny expansion noises when it is heating up, but it has never made any noise to waken us during the night and we are light sleepers. Just need to turn it on about a half-hour before bed to warm up the room. The room stays pleasantly warm even on the 750W low power setting with the built-in temp control turned less than half-way to max. It heats without moving air around (no fans) so it takes a while to distribute the heat. Folks who want instant blowing heat may not like it but they will have to tolerate fan noise. For us, silence is golden and this heater provides silent heat which is fully adjustable. It is also light weight and moves easily by either carrying (has built-in handle) or rolling on the supplied casters.
    Rating: 5 / 5

  7. P. Zeissig on April 13, 2010 at 4:52 pm

    We purchased this from Amazon.com for our 6 month old baby’s room so we don’t have to heat the rest of the house just to get his room warm. I compared this to oil heaters and found this to be better since it is also quiet (no fans) and fairly safe.

    I was surprised on how light weight and small it is compared to the pictures on the web. The dimensions are: 26″wide, 20″ high (23″ high on wheels), 2.25″ depth (10″ deep when on wheels). It is easy to carry because it only weighs about 5 to 8 pounds (I didn’t weigh it).

    The heating elements heats up very fast, so that is a definite advantage over oil heaters. It can be mounted on the wall with the included wall mount bracket. Once my baby starts walking I will mount it on the wall to keep it out of reach for him, since the front of the unit does get very hot (although you will not burn yourself if you happen to touch it for a second). So you can hang it up like a picture. The heat only radiates from the front of the unit. The front is smooth in comparison to a oil heater, so your child will suffer less injury than the sharp radiators on oil heaters if he/she runs into it with the head.

    It heats a small bedroom quickly, so I think it will also heat a medium sized room with low celings well, but probably not a large living room or kitchen/dining-room.

    PROS:

    1. Lightweight low profile design can be wall mounted

    2. Quick heating

    3. Totally quiet

    4. High power heating

    CONS:

    1. Odor: During the first day of use after new it off-gases a lot and generates a strong odor. So make sure to turn it on high heat in the garage or somewhere away for several hours before installing it in a closed room.

    2. No digital thermostat: I would prefer a digital thermostat where you can set a temperature. With this one you have to wait until the room is at the right temperature and then set it. This is not exact and takes several tries to get it right.

    3. The front of the unit heats up more than I expected, so make sure kids stay away from it.
    Rating: 4 / 5

Leave a Reply

*

Discount Tower Heater

Powered by WP Robot